Sutphen has various demonstrator apparatus available throughout the year. Product types tend to vary depending on what has or has not been sold. Sutphen demonstrators sell quickly. It’s best to contact your local sales representative to schedule a demo. You can locate your representative on the “DEALERS” page of this web site. Sutphen also attends most major national, regional and local trade shows. A list of these shows can be found on the “EVENTS/LINKS” page of our site.
As of 4/21/16, we have! The Sutphen organization still believes whole-heartedly in our original mid-mount design. We still believe that the lower center of gravity and simplicity of aerial operations provides a safe and maneuverable apparatus, however, our customers have asked us for several years to provide them with a rear-mount Sutphen that will fit their needs. So that is exactly what we did. We did it the only way we know how, and that was to make it the best! Visit our product page for more details.
Sutphen does provide sponsorships for various charities and fire training events. However, there are far too many to be involved in every one of them. Please contact your local dealer to get the process started, and to see if your event can be included in the coming year’s budget.
The Sutphen web site contains contacts for all Sutphen products. Contacts for service parts are divided into two groups. For aluminum-bodied pumpers, Model 95′ aerial platforms, 100′ aerial platforms, 110′ aerial platforms, and HeavyRescues, call 800-848-5860. For stainless-steel-bodied pumpers, 75′ aerials, 70′ aerial platforms and 100’/104′ aerial ladders, contact 800-343-2712.
Sutphen operates a 5,000-square-foot service and refurbishment facility in Springfield, Ohio, which specializes in refurbishing trucks and remounting aerials.
To receive a quote, please contact Tom Stites or Dareth Fowler at (937) 969-8851.
The Sutphen mid-mount platform is constructed using heat-treated T-6061 aircraft aluminum, with a box boom design that utilizes aircraft style Huck Bolt technology. With the four-section box boom design Sutphen provides a 3:1 safety factor.
The vertical reach of a Sutphen SP 95 is 93′ 7″ at an 80-degree elevation.
The vertical reach of a Sutphen SP 100 is 100′ at an 80-degree elevation.
The vertical reach of a Sutphen SP 110 is 110′ at an 80-degree elevation.
The horizontal reach of a Sutphen SP 95 is 82 feet.
The horizontal reach of a Sutphen SP 100 is 90 feet.
The horizontal reach of a Sutphen SP 110 is 99 feet.
The Sutphen bucket (either two, or three door) is 60 inches wide x 42 inches deep x 42 inches high.
The Sutphen bucket is 17.5 square feet. The Sutphen bucket is 61.5 cubic feet.
The Sutphen SP 95, SP 100, and SPH 100 have jacks located in three locations. The stabilizer jacks are mid mounted and have a jack spread of 18 feet. They consist of a single “H” style, out and down, outrigger on each side of the apparatus. They are individually operated allowing the ability to short-jack the apparatus when necessary. The second set of jacks is located behind the rear duals. They are a down jack only and extend to the ground directly behind the rear dual. A third set of jacks is mounted on the frame rail underneath the cab. They extend downward to the front axle to provide stabilization to the front suspension.
The Sutphen SP 110, SLI 110 and SPI 112 utilize a jack system located in three places. There are two sets of stabilizer jacks, mid mounted, in a patented “X” pattern stabilizing system with a jack spread of 20 feet. The jacks are individually operated allowing the ability to short-jack the apparatus when necessary. The second set of jacks is located behind the rear duals. They are a down jack only and extend to the ground directly behind the rear dual. A third set of jacks is mounted on the frame rail underneath the cab. Again, they extend downward to the front axle to provide stability to the front suspension.